Top
Hello

Still have questions or looking for a solution?
+49 211 53 77 100
info@sigma-av.com

AV Maintenance and SLAs: Which Service Contract Makes Sense for On-Site Media Technology

Düsseldorf, 11. November 2026 | By the SIGMA editorial team | Article

Key points at a glance: 

Not every room or area requires the same level of service. The most suitable maintenance contract for your audiovisual equipment depends on three questions: How critical is the room or area – and who would notice a fault first, staff or visitors? How much in-house AV expertise is available? And how quickly does someone need to be on site? This article provides you with a framework for making your decision and helps you to scrutinise every SLA – even if you don’t end up choosing us.

- Which room needs which service

- A comparison of four operating models

- When it’s worth having a technician on site

- What to look out for in an SLA

Quick question, quick answer:

What is an SLA? A Service Level Agreement sets out the services a service provider will deliver in the event of a fault – such as service hours, response times and escalation procedures.

Is the response time the same as the resolution time? No. The response time indicates when someone will attend to the fault – not when it will be resolved.

Do I need the same SLA for every room? No. A boardroom needs faster assistance than a standard meeting room with alternative facilities. An exhibition space open to the public needs support during opening hours, including at weekends.

What is the difference between monitoring and support? Monitoring detects faults; support resolves them.

When is it worth having a technician on site? If there are many rooms on the premises, daily use by staff or visitors, operational support for management and guests, and if there is no in-house AV staff.

Do you want to ensure the smooth running of your media technology? We’ll show you which model suits your rooms. Enquire without obligation →

A technical fault at the worst possible moment

The management team is hosting an important client, two venues are connected, the presentation is ready – and the screen remains black. Or the camera starts up, but nobody can hear anything. At times like these, what matters isn’t how well the technology worked during the technical run-through, but how quickly someone can help.
Or: it’s Saturday morning, and the exhibition is packed. At the media station in the second room, the screen remains black; in the foyer, the projection is running without sound. There is no alternative room and no in-house IT department. The supervisory staff are there for the visitors, not for the technology. It’s not a meeting that’s at stake here, but the impression visitors take away with them. Whether it’s a brand experience, a shop or a foyer: the technology is part of the experience, and any failure is visible to everyone.

Media technology will fail at some point, just like any technology. The real question is how well prepared you are for it: who notices the fault, who fixes it, and how quickly?

What maintenance and what SLA do AV systems at the site require?

The short answer: as much as the criticality of your rooms demands. Standard meeting rooms are usually well covered by scheduled maintenance, monitoring and support during fixed service hours. Rooms where failures affect senior management, customers or visitors require a faster SLA. And where many rooms are used daily and there is no in-house AV staff, it is often worth having an on-site technician. In any case, be sure to read the SLA carefully, as the most important differences lie in the details.

Why AV technology fails differently to IT

Every AV installation is a chain: in a conference room, it consists of a display, camera, microphones, signal processor, control system, network and platform; in an exhibition or shop, it comprises playback devices, media players, content, control systems and the network. If one link fails, the whole room comes to a standstill. Often, the fault lies not with the device itself, but within the chain: an update to the conference platform or media player, a changed network setting, or a reconnected cable.

Then there is the timing. AV faults usually become apparent precisely when someone needs the technology – when a meeting begins or visitors are present. A support ticket processed later in the day is of no help by then. That is why, with media technology, it is so important to detect as many faults as possible before anyone enters the room.

As well as faults, there are regulatory obligations. The inspection of electrical equipment in accordance with DGUV Regulation 3 is the operator’s responsibility. The operator determines the inspection intervals on the basis of the risk assessment, depending on the type of equipment and the operating environment. DGUV Information 203-071 serves as a guide. It makes sense to integrate the inspections into the maintenance schedule. At SIGMA, the inspections can be incorporated into the Managed Service; depending on the contract, they may be included or can be added as an extra, with inspection reports available digitally or on paper.

Media technology for visitors: What’s changing in the service

- A breakdown is public knowledge. It is not colleagues who notice it, but visitors and customers. There is no alternative room.

- Opening hours rather than office hours. Service hours must be able to cover evenings, weekends and public holidays. Maintenance should take place when nobody is there. At SIGMA, this is possible via Premium SLA models with 24/7 support.

- Continuous operation. Equipment often runs for many hours a day, seven days a week. This shortens the maintenance intervals for fans, power supplies, filters and brightness settings.

- Content is part of operations. Exhibition changes, campaigns and prices must be uploaded and backed up. A black screen is sometimes not a hardware problem, but a content issue.

- No on-site AV staff. Supervisors, sales staff and trainers are not technicians. Remote maintenance and a simple power-on/power-off routine determine whether a fault lasts minutes or days.

- Many locations, few devices. For retail chains, it is rarely worth travelling to each individual site. Centralised monitoring, standardised technology and replacement units are the key solutions.

- Visitors touch the screens. Touchscreens and control elements require robust technology, cleaning and calibration. Wall mounts and suspended fixtures in public areas should be included in visual inspections.

Which room needs which service?

Classify your rooms and areas by criticality. Not every room requires the highest service level, but every room needs the appropriate one. Three questions can help: Who notices the outage first – staff or visitors? Is there an alternative solution? Is the equipment running continuously?

- Boardroom / management conference room: Assistance must be available very quickly, as faults affect senior management and clients. Carry out regular maintenance and check critical appointments in advance; the need for operational support is high, often involving assistance with important meetings.

- Standard meeting room: Assistance within service hours is usually sufficient, as there is generally an alternative room available. Scheduled maintenance is sufficient; with standardised operation, little support is required.

- Brand Experience Centre: Support must be available quickly during events and opening hours, as this is where the brand is experienced. Check systems before important visits; operational support is required for hosts and guides.

- Retail store / branch: Detect faults early and remotely, as there is no AV staff on site. Maintenance outside opening hours; content and campaign changes are part of day-to-day operations.

- Museum / Exhibition: Rapid assistance during opening hours, including at weekends, as the media station forms part of the exhibition. Plan for technology and content changes when exhibitions change; supervisory staff need simple procedures in the event of an emergency.

- Fitness and leisure centres: Technology runs all day, often under heavy use (sound systems, displays, exercise studios). Rapid assistance during peak times, maintenance during quieter periods.

- Public spaces / foyer: Systems operate round the clock and are visible to everyone. 24/7 monitoring makes more sense here than in internal rooms; maintenance must take robustness and cleaning into account.

- LED wall in continuous operation: Rapid assistance in the event of visible failures; regular maintenance is required due to the long operating times. Keep spare modules from the same batch on hand, otherwise there will be visible colour differences. Operational support is rarely needed.

This classification often results in a hybrid model: a higher service level for a few critical rooms, and a standard level for the rest.

A comparison of four operating models

On-call fault rectification

Suitable if you have a small number of rooms with low criticality and in-house AV expertise. Limitations: Neither response times nor costs can be planned, and faults are only noticed during meetings or when visitors report them.

Scheduled maintenance contract

Our recommendation: Suitable if your equipment needs to be regularly checked and kept up to date. An annual inspection is the minimum standard; half-yearly or quarterly intervals are often more cost-effective. This includes cleaning, alignment, calibration, functional testing and documentation. Limitations: Faults occurring between maintenance appointments are not automatically detected.

Monitoring plus on-site service

Suitable if you have many rooms or sites and faults need to be detected early. The monitoring system keeps an eye on the systems round the clock, automatically reports faults and enables remote maintenance via secure VPN connections.

Limitations: Monitoring detects faults but does not rectify them; rectification takes place during the agreed service hours.

On-site support with technicians

Suitable if many rooms are used daily and operational support is required. Limitations: This involves the greatest level of effort; it is only worthwhile once a certain number of rooms and a certain level of usage are reached.

On-site support: When it is worthwhile

Many sites do not have their own AV staff, yet the technology must still function. In such cases, SIGMA provides on-site support directly at the premises for several corporate clients. The technicians take care of:

- Operation and maintenance of media technology, presentation systems and video conferencing solutions

- First-level support in the event of faults and assistance with fault analysis

- Service, maintenance and fault rectification

- acting as the point of contact for on-site staff, in close coordination with SIGMA’s service and project team

Having an on-site technician is particularly worthwhile if several of the following apply:

- There are many rooms equipped with media technology at the site.

- The rooms are used daily – by staff or visitors.

- Management and guests require assistance with operating the equipment.

- There is no in-house AV staff.

How to read an SLA correctly

The following points will help you with any SLA, not just ours:

- Response time is not the same as resolution time. The response time describes when someone will attend to the fault. When it is resolved is often specified elsewhere – or not at all.

- Service hours: Does the commitment apply round the clock or only on weekdays during office hours?

- Prioritisation: How are faults categorised, and who decides this?

- Escalation: What happens if an issue is not resolved within the agreed timeframe?

- Measurement: How and by whom are the times measured?

- Exceptions: What is excluded, such as user error or equipment from other suppliers?

- Credits: What happens if service level agreements are not met?

- Replacement equipment: Is replacement equipment available, and how quickly can it be provided?

Monitoring is not the same as support. 24/7 monitoring means that faults are detected round the clock. They are rectified within the agreed service hours. Anyone who confuses the two may expect a repair at night that is not even provided for in the contract.

For comparison, here is our standard SLA: 

We respond to telephone enquiries within up to 4 hours, and on-site support is provided within up to 3 working days. Support is available on working days from 8 am to 5 pm; enquiries are handled via a ticketing system. Monitoring runs round the clock. In the event of breaches of these commitments, the contract provides for service credits or price reductions, depending on the agreement. 

All equipment installed by SIGMA at the agreed location is covered; any extensions are discussed separately. The sample contract on our Managed Service page illustrates how such a contract is structured.

Our guidance on contracts is intended as a guide, not as legal advice.

Do the maths rather than take our word for it: what does a system failure cost?

It is possible to make a rough estimate of whether a more comprehensive contract is worthwhile. To do this, use your own figures:

- Cost per hour of downtime in the conference room ≈ number of people in the room × average staff cost per hour + consequential costs (rescheduled appointments, travel, missed opportunities)

- Cost per hour of downtime in a public area ≈ lost revenue or admission fees during this time + expenditure on alternative solutions + impact on visitor satisfaction and brand reputation (difficult to quantify, but real)

- Expected downtime costs per year ≈ hours of downtime per year × cost per hour of downtime

- Comparison: avoided downtime costs per year (hours of downtime without a contract minus hours of downtime with a contract, multiplied by the cost per hour of downtime) versus the annual cost of the contract

The more intensively a room is used, the more people are affected, and the more important the events are – or the more visible the downtime is to visitors – the more likely it is that a higher service level will pay off.

Who is responsible? IT, Facilities and AV

Many faults take too long to resolve not because of the technology itself, but because it is unclear who is responsible. You should therefore clarify three questions in advance:

- Who reports faults? The users, IT, Facility Management or the monitoring team – and, in venues open to the public, also security staff, branch managers or reception?

- Who decides on updates? Firmware and platform updates affect both IT and AV equally. SIGMA’s Managed Service includes firmware updates and security patches; compatibility tests and a rollback plan are carried out before every update.

- Who pays? Does the media technology fall under the IT budget, the facilities budget, the marketing budget or the exhibition budget – or several of these?

Having a dedicated point of contact on the service provider’s side significantly streamlines the process.

What’s involved in the handover after a project

Smooth operation starts with a smooth handover. Upon completion of a project, an integrator should deliver three things: comprehensive documentation of the equipment and settings, training for users and the IT team, and integration with the monitoring system. For IBM, SIGMA has equipped over 150 meeting rooms across seven sites with standardised technology and manages five of these sites as part of a managed service.

You can find an overview of planning, installation, commissioning, acceptance and documentation on our page on AV installation and integration.

Checklist: Ten questions for your AV service provider

1. What response times do you guarantee – by telephone and on site?

2. Is a resolution time also guaranteed?

3. What are the support hours – and do they cover our opening hours, including weekends and public holidays?

4. What does your monitoring system track, and who responds to the alerts?

5. How are faults prioritised and escalated?

6. Are replacement devices available, and how quickly can they be provided?

7. Which devices are covered by the contract?

8. How often is maintenance carried out, what does it involve, and does it take place outside opening hours?

9. Who installs updates and content, and how are they coordinated?

10. Is on-site technical support available?

Frequently asked questions about AV maintenance and SLAs

What does a maintenance contract for media technology cover?

It sets out how often the equipment is inspected and serviced, how faults are reported and rectified, and the times and response times at which the service provider carries out these tasks. Monitoring, updates and replacement equipment are often included.

What is the difference between response time and resolution time?

The response time refers to when someone will address the issue. The resolution time refers to when it is resolved. Many SLAs only specify the response time.

What is the difference between monitoring and support?

Monitoring detects faults, often round the clock. Support resolves them, usually within agreed service hours.

Do I need the same SLA for every room?

No. It makes sense to categorise them according to criticality: a higher service level for boardrooms, exhibition spaces, brand experiences and other critical areas, and a standard level for the rest.

What are the key points to consider in a service contract for media technology used in museums, shops and brand experiences?

It is important to have service hours that cover opening hours (including at weekends), remote maintenance and monitoring – as there is usually no AV staff on site – maintenance outside visiting hours, clear guidelines on content and updates, and replacement equipment that is available at short notice.

When is it worth calling out a technician?

Where there are many rooms on the premises, these are used daily by staff or visitors, management and guests require assistance with the equipment, and there is no in-house AV staff.

Does SIGMA also service equipment from other manufacturers?

SIGMA’s Managed Service covers all equipment that SIGMA has installed at the agreed location. Any additions or changes will be discussed separately.

Conclusion

There is no single ‘right’ service contract. There is a suitable one for every room – depending on how critical it is, who would be the first to notice a failure, how much in-house expertise is available, and how quickly help needs to be on hand. Those who prioritise their rooms and areas according to criticality, read the SLA carefully and distinguish between monitoring and support will make a decision that pays off when it really matters.

As a full-service partner, SIGMA supports media technology from planning through to integration and operation. This includes monitoring, maintenance, on-site support and lifecycle management, ranging from equipment monitoring to end-of-life planning. The service is structured consistently and is tailored to the opening hours of your premises. Stephan Verfürth explains how managed services work in practice in an interview in the Newsroom. You can find all our services on our Managed Services page.